UPDATES TO VERSION 2.0

• CURV® composite harness, gas fill cutout is compatible with rear tank bikes
• Black N6 ripstop nylon roll-top dry bags
• Gnoblin Compatible
• Rear webbing straps/lash points
• 25mm SJ compression buckles
• Foam wear point contact pads

The Reckless 10 radically transforms your trail-riding experience by taking all the weight of tools, tubes, snacks, jacket, and extra fuel out of your backpack and off your back, transferring it to the bike instead. 

With the R10, you can carry up to 5 extra fuel bottles, four of which can be stored in the harness, and one in an optional MOLLE bottle holder on the non-exhaust side of the bike. The fuel bottles can be connected to each other with a leash that is provided on the bottom of the R10 dry bag. This is a cost-effective way of extending your range without having to purchase a large aftermarket desert tank.

It comes with two waterproof roll-top dry bags that you can access easily throughout the day. The center of the CURV® composite harness has removable webbing straps–perfect for carrying a rolled-up windbreaker or rain jacket.  You can easily strap down other items with them, such as fuel bottles or a small tail bag.

• CURV® composite harness, gas fill cutout is compatible with rear tank bikes
• Optimized integration for the optional Gnoblin rear mounting accessory.
• Two removable 5L dry bags
• Rear webbing straps/lash points
• MOLLE expandability
• 25mm SJ compression buckles
• Foam contact pads

Harness Materials

• CURV® composite harness
• 1680D Ballistic Nylon with Hypalon armor
• Leg holsters wrapped behind harness and riveted, to eliminate seam failures
• Aluminum stiffener supports built into each leg of harness adding lateral rigidity
• EVA foam pad on underside of harness reduces chafe to the luggage and the bike
• Reflective logos and material on each leg

Dry Bag Materials

• 100% waterproof, durable N6 ripstop nylon

Exhaust Heat Shield Materials

• Laser-cut anodized aluminum

​​​​​DRY BAG CAPACITIES

• Two 5L dry bags

DIMENSIONS

• Length: 12in / 30.5cm
• Width: 7in / 18cm
• Height: 5in / 13cm
• Weight: 4.6lbs / 2kg (including dry bags)

• CURV® composite harness
• Two 5L roll top dry bags
• Rear fender mounting straps
• Leg mounting straps
• Heat Shield with hose clamp
• Cleat Kit for mounting
• Hardware Pack (four t-nuts, four screws with Loctite, Allen key, two CURV spacers).
  • Black washers are not needed for assembly

• Exhaust heat damage is not covered under warranty. Please use the included heat shield and follow the installation instructions carefully.
• On dual-exhaust bikes or bikes with especially high/exposed pipes, you will need a second heat shield, available for purchase in our website's Hardware & Parts section.
• Africa Twin customers, please note that the passenger grab handles found on the 2016-19 Africa Twin models may inhibit the fit of the Reckless 80L on the tail of the bike.
• Contact between soft luggage (no matter how soft) and your bike's plastics or painted surfaces will cause cosmetic wear to the bike over time because accumulated dirt is abrasive. If that is important, try applying a clear protective film (like Allstar Performance Tape or 3M Polymask Protective Tape) to your bike.
• Different bikes and installation approaches present different wear points to the Reckless 10 harness. After installation, go for a short test ride, then check for wear points. Adjust the harness position, file down sharp rack edges, or apply a sacrificial wear patch as needed. Continue to check for high-wear points over time, but remember that the harness is made to take a lot of abuse. Some visible wear is normal, and in no way does it affect the strength or waterproofness of the luggage.

Reckless 10L is designed to fit a wide variety of motorcycles – from small enduro-style bikes up to larger adventure bikes. 

• Harness Dimensions
• Assembly Instructions
• We recommend adding the optional Gnoblin rear mounting accessory for rock-solid attachment & easy on-off functionality (not compatible with the R10 in its wide position).

Curious how our luggage will look on your bike? Check out the bike-specific section of our Help Center for fit examples and photos to help you visualize your setup.

Do you have a photo of your bike with Mosko Luggage that we can use in our Help Center? Shoot it to us at moskomoto@moskomoto.com.